 |
|
Frequently Asked Questions
Show Part Numbers
Hide Part Numbers
1008486, 1008489, 1008514, 1008515, 1008575, 1008577, 1008788, 1008790, 1014208R, 1014210R,
1014211R, 1014267R, 1014344R, 1014345R, 1014420R, 1200335, 1200339, 3502069, 3502069R, 3502074,
3502074R, WME1T492-020, WME1T506-021, WMEIT492-004
Show Model(s)
Hide Models
E-4500D, E-4500D SB, E-2500D SB, E-2500D, S-5000D, S-5200D, E-2600D SB, E-2600D, E-2610D, E-2600D SB,
E-2600D SB, E-4610D SB, S-5405D, S-5205D, S-5215DQ: How do I remove and replace the rear fan in the 6-bay micro BTX case?A: Remove the rear fan
- Turn off the computer, and then disconnect the power cord.
- Remove the right side panel.
- Inside the case, following the fan cable to its connection on the motherboard. Note the location, and then disconnect the cable.
- At the rear of the case, remove the four rear fan screws.
View Picture
- Remove the fan from the case.
Replace the rear fan
- Align the fan inside the case so that the label on the fan faces the rear of the case and the screw holes in the case align with the screw holes in the fan.
- Secure the fan to the case with four screws.
View Picture
- Reconnect the fan cable to the motherboard.
- Replace the right side panel.
- Connect the power cord, and then turn on the computer.
|
|
|
United States
(change country or region)