Frequently Asked Questions
      Show Part Numbers

      Show Model(s)

Q: How do I remove and replace the top bezel on the Gateway 5-bay case?

A: Remove the top bezel

  1. Turn off the computer, and then disconnect the power cord.

  2. Remove the left side panel.

  3. Remove the front bezel.

  4. Inside the case, between the power supply and the top 5.25-inch drive bay is an opening for the top bezel release latch.
    View Picture

  5. Press and hold the top bezel release latch, and then slide the top bezel toward the front of the computer case about one-half inch.
    View Picture

  6. Lift the top bezel off the case.

  7. After the release latch is disengaged, lift the top bezel off the computer case.
    View Picture

Replace the top bezel

  1. Align the top bezel on the computer case, but extending past the front of the case about one-half inch.
    View Picture

  2. Slide the top bezel toward the back of the computer case until the release latch engages.

  3. Replace the front bezel.

  4. Replace the left side panel.

  5. Plug in the power cord, and then turn on the computer.