Frequently Asked Questions
      Show Part Numbers

      Show Model(s)

Q: How do I remove and replace the right side panel on the 7-bay BTX computer case?

A: Remove the right side panel

  1. Turn off the computer and then disconnect the power cord. Device cables can also be disconnected. Note connection locations.

  2. On the rear of the computer, remove the shipping thumbscrew, and then lift the release lever until it is perpendicular to the case. Feeling resistance at approximately half way is normal. The top of the right side panel moves away from the case slightly.
    View Picture

  3. Tilt the right side panel away from the case, and then lift it off.
    View Picture

Replace the right side panel

  1. Note the tabs at the bottom of the right side panel and the slots at the bottom of the case.
    View Picture

  2. Align the tabs on the panel with the slots in the case.
    View Picture

  3. Swing the panel up, and then press it into place on the side of the computer case until the release latch engages.
    View Picture

  4. Replacing the thumscrew on the rear of the case is optional.
    View Picture

  5. Connect the power cord and any device cables that were disconnected, and then turn on the computer.