Frequently Asked Questions

Q: How do I replace the hard drive cage in the St. Francis Mid-tower case?

A: Remove the hard drive cage

  1. Remove the side service panel.

  2. Remove the front bezel.

  3. Inside the case, remove the three screws securing the hard drive cage.
    View Picture

  4. At the front of the case, remove the final screw securing the hard drive cage.
    View Picture

Replace the hard drive cage

  1. Align the hard drive cage in the case, verify that the tab on the side is inserted at an angle through the bottom of the cage.
    View Picture

  2. At the front of the case, replace the one screw removed previously.

  3. Inside the case, replace the three screws that secure the hard drive cage.

  4. Replace the front bezel.

  5. Replace the side service panel.